What type emulator for Daewoo Tacuma 2002??

What type emulator for Daewoo Tacuma 2002??

Postby Stephan » 15 May 2012, 8:45

Hello!
I would like to buy Immo emulator for Daewoo Tacuma 2002.

ECU:

KEMSO
S010016030
DAEWOO
1AEK
96378049

You device is suppurt this type of ECU?

Best Regards, Stephan
Attachments
2.JPG
1.JPG
3.JPG
Stephan
 
Posts: 13
Joined: 14 May 2012, 22:32

Re: What type emulator for Daewoo Tacuma 2002??

Postby carlabimmo » 15 May 2012, 8:49

Hi,
To this type ECU must use emulator immo Matiz, Tacuma, Lanos
Emulator must connect how on the picture in manual http://carlabimmo.com/presta-pl/attachm ... chment=980
before connecting ECU to the car must cut off Immo line it is 56pin or disconnect immo box
carlabimmo
 

Re: What type emulator for Daewoo Tacuma 2002??

Postby Stephan » 15 May 2012, 8:52

so it is transparent with the instructions, thanks!!
Stephan
 
Posts: 13
Joined: 14 May 2012, 22:32

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 19 Sep 2012, 19:00

Hi Michal. have a costumer with a Tacuma 2003 1.6 petrol immo problem, do you know if julie 8 jumpers can work???

regards
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby carlabimmo » 20 Sep 2012, 9:02

Hello,
Yes, without problem can use this type emultor for this job my Friend,
carlabimmo
 

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 21 Sep 2012, 9:49

thanks a lot Michal
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 04 Oct 2012, 16:37

Hi Michal, I used the Julie as you told me , but the car didn't start,,, I cut off pin 56, the blue light flash each 2 seconds, but the car didn't start , any Idea???

regards
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby carlabimmo » 05 Oct 2012, 10:29

Hi Friend,
please check on the emulator PCB resistor from CODE line, what walue have in Ohm.
It's first resistor how start from end of cable and go on the PCB of emulator.
He must have 10 Ohm
Thanks,
carlabimmo
 

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 10 Oct 2012, 16:59

hi, did you mean this resistor in picture??
Attachments
IMG_0013[1].jpg
reistor from julie
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 10 Oct 2012, 17:07

I don't understand connections on tacuma because pin 60 is inyector please look at the picture

regards
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 10 Oct 2012, 17:09

the picture wiring diagram
Attachments
tacuma.jpg
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby carlabimmo » 11 Oct 2012, 8:35

Hello,
In manual we have 4 types connecting for family this ECU.
Please check with multimeter than your ECU be compatible with some connecting from manual.
Power must be
+12V (15'),
GND
CODE (cut off from plug ECU or disconnected immobilizer box)

Thank you for picture with emulator, and i need know value in Ohm of this resistor.
carlabimmo
 

Re: What type emulator for Daewoo Tacuma 2002??

Postby germanml » 15 Oct 2012, 11:39

Hi friend, the resistor have 200 ohm ,,,,, I mean the one in the picture,,,,, what do you think friend??
germanml
 
Posts: 122
Joined: 25 Jun 2012, 20:10

Re: What type emulator for Daewoo Tacuma 2002??

Postby carlabimmo » 15 Oct 2012, 14:16

Hello,
Please solder out this resistor and if have use 10 Ohm. (if haven't only connect this two place together by solder)
I waiting on raport!,
Thanks,
carlabimmo
 

cron